TR EN

Energy Labelling

Communique on  Energy Labelling Of Household Dishwashers (2019/2017/AB) (SGM:2021/2)

Scope of the Legislation (briefly describe):

This Communique covers built-in household dishwashers and household dishwashers connected to electricity, including those that can operate with batteries.

Basic security requirements:

In addition to the basic safety requirements defined in the Electromagnetic Compatibility Regulation (2014/30/EU), the Regulation on Electrical Equipment Designed for Certain Voltage Limits (2014/35/EU), the Energy Energy Act, which was put into effect with the Presidential Decision dated 1/3/2021 and numbered 3584. For the implementation of the Labeling Framework Regulation, it is to determine the requirements for the labeling and additional product information of domestic dishwashers connected to electricity, including built-in household dishwashers and those that can operate with batteries.

Conformity Mark Required by the Legislation: CE mark and Energy Label

Conformity Assessment Procedure Required by the Legislation:

Measurements and calculations, in order to comply with the requirements of this Communiqué and to verify compliance with the requirements of this Communiqué, using harmonized standards published for this purpose in the Official Journal of the European Union or in line with the provisions below, generally recognized, other reliable, accurate, state-of-the-art technology. and using reproducible methods. In case a parameter is declared in accordance with the fifth paragraph of Article 5 of the Energy Labeling Framework Regulation and Table 4 of Annex-VI of this Communiqué, that parameter is used as the declared value by the supplier for the calculations in this Annex.

Conformity assessment procedures are determined by application communiqués and the manufacturer is given the right to choose between those specified in the "ANNEX-4 INTERIOR DESIGN CONTROL" and "MANAGEMENT SYSTEM REGARDING APPENDIX-5 CONFORMITY ASSESSMENT" of the Regulation on Ecodesign of Energy Related Products (CBK No: 5187). Provided that it is duly justified and proportional to the risk, conformity assessment procedures are selected among the relevant modules specified in the "CE" Marking Regulation.

Date of Entry Into Force:

25.03.2021

 

Communique on  energy labelling of household washing machines and household washer-dryers (2019/2014/AB) (SGM:2021/4)

Scope of Legislation:

This Communique; It covers household type washing machines connected to electricity, including those that can operate with batteries, and washing machines with dryers connected to electricity, built-in household type washing machines and built-in household washing machines with dryers.

Basic security requirements:

In addition to the basic safety requirements defined in the Electromagnetic Compatibility Regulation (2014/30/EU), the Regulation on Electrical Equipment Designed for Certain Voltage Limits (2014/35/EU), the Energy Energy Act, which was put into effect with the Presidential Decision dated 1/3/2021 and numbered 3584. In order to implement the Labeling Framework Regulation, the labeling and additional product information of household washing machines connected to the electricity network, including those that can operate with batteries, and household dryers connected to the electricity supply, built-in household type washing machines and built-in household type tumble dryers. determining the requirements.

Conformity Mark Required by the Legislation:

CE mark and Energy Label

Conformity assessment procedure required by legislation:

Measurements and calculations, in order to comply with the requirements of this Communiqué and to verify compliance with the requirements of this Communiqué, using harmonized standards published for this purpose in the Official Journal of the European Union, or in accordance with the provisions below, by using other reliable, state-of-the-art technology. is done using accurate and repeatable methods. If a parameter is declared in accordance with the fifth paragraph of Article 5 of the Energy Labeling Framework Regulation and Table 7 of Annex VI for washing machines and Table 8 for washer-dryers, that parameter is declared by the supplier as the declared value in this Annex. used for calculations.

Conformity assessment procedures are determined by application communiqués and the manufacturer is given the right to choose between those specified in the "ANNEX-4 INTERIOR DESIGN CONTROL" and "MANAGEMENT SYSTEM REGARDING APPENDIX-5 CONFORMITY ASSESSMENT" of the Regulation on Ecodesign of Energy Related Products (CBK No: 5187). Provided that it is duly justified and proportional to the risk, conformity assessment procedures are selected among the relevant modules specified in the "CE" Marking Regulation.

Date of Entry Into Force:

25.03.2021

 

Communique on energy labelling of electronic displays (2019/2013/AB) (SGM:2021/6)

Scope of the Legislation:

This Communique covers electronic displays, including televisions, monitors and digital information displays.

Basic security requirements:

In addition to the basic safety requirements defined in the Electromagnetic Compatibility Regulation (2014/30/EU), the Regulation on Electrical Equipment Designed for Certain Voltage Limits (2014/35/EU), the Energy Energy Act, which was put into effect with the Presidential Decision dated 1/3/2021 and numbered 3584. To determine the requirements for labeling and additional product information for electronic displays, including televisions, monitors and digital information displays, for the implementation of the Labeling Framework Regulation.

Conformity Mark Required by the Legislation:

CE mark and Energy Label

Conformity Assessment Procedure Required by the Legislation:

 Measurements and calculations, in order to comply with the requirements of this Communiqué and to verify compliance with the requirements of this Communiqué, using harmonized standards published for this purpose in the Official Journal of the European Union or in line with the provisions below, generally recognized, other reliable, accurate, state-of-the-art technology. and using reproducible methods. Measurements and calculations must comply with the provisions of this annex. In the absence of existing relevant standards and until the reference numbers of the relevant harmonized standards are published in the Official Gazette, the pass test specified in Annex-IIIa of the Communiqué on Ecodesign Requirements (2019/2021/EU) (SGM:2021/5) methods or other generally recognized, state-of-the-art, reliable, accurate and reproducible methods are used.

Conformity assessment procedures are determined by application communiqués and the manufacturer is given the right to choose between those specified in the "ANNEX-4 INTERIOR DESIGN CONTROL" and "MANAGEMENT SYSTEM REGARDING APPENDIX-5 CONFORMITY ASSESSMENT" of the Regulation on Ecodesign of Energy Related Products (CBK No: 5187). Provided that it is duly justified and proportional to the risk, conformity assessment procedures are selected among the relevant modules specified in the "CE" Marking Regulation.

Date of Entry Into Force:

25.03.2021

 

Communique on  energy labelling of refrigerating appliances (2019/2016/AB) (SGM:2021/8)

Scope of the Legislation :

It includes cooling devices with a volume of more than 10 liters and a volume equal to or less than 1500 liters, connected to the electricity supply.

Basic security requirements (One or two sentence summary):

In addition to the basic safety requirements defined in the Electromagnetic Compatibility Regulation (2014/30/EU), the Regulation on Electrical Equipment Designed for Specific Voltage Limits (2014/35/EU), an electrical source of more than 10 liters and a volume equal to or less than 1500 liters To determine the requirements for the labeling and additional product information of the connected cooling devices.

Conformity Mark Required by the Legislation:

CE mark and Energy Label

Conformity Assessment Procedure Required by the Legislation (briefly describe):

Measurements and calculations are made using harmonized standards or other generally recognized, state-of-the-art, reliable, accurate and repeatable methods in order to comply with the requirements of this Communiqué and to verify compliance with the requirements of this Communiqué.

Conformity assessment procedures are determined by application communiqués and the manufacturer is given the right to choose between those specified in the "ANNEX-4 INTERIOR DESIGN CONTROL" and "MANAGEMENT SYSTEM REGARDING APPENDIX-5 CONFORMITY ASSESSMENT" of the Regulation on Ecodesign of Energy Related Products (CBK No: 5187). Provided that it is duly justified and proportional to the risk, conformity assessment procedures are selected among the relevant modules specified in the "CE" Marking Regulation.

Date of Entry Into Force:

25.03.2021

 

Communique on energy labelling of domestic ovens and range hoods (SGM-2015/8)

Scope of the Legislation:

It covers domestic ovens and household electric extractors, including those combined with a hob, even if sold for non-domestic use.

Basic Security Requirements:

In addition to the basic safety requirements defined in the Electromagnetic Compatibility Regulation (2014/30/EU), the Regulation on Electrical Equipment Designed for Certain Voltage Limits (2014/35/EU), the labeling and additional requirements for the placing on the market of household ovens and household aspirators determine the requirements for providing product information.

Conformity Mark Required by the Legislation:

CE mark and Energy Label

Conformity Assessment Procedure Required by the Legislation:

Measurements and calculations are made using harmonized standards, other generally recognized reliable, accurate and repeatable methods that take into account the latest technology, in order to comply with the requirements of this Communiqué and to verify compliance with the requirements of this Communiqué.

Conformity assessment procedures are determined by application communiqués and the manufacturer is given the right to choose between those specified in the "ANNEX-4 INTERIOR DESIGN CONTROL" and "MANAGEMENT SYSTEM REGARDING APPENDIX-5 CONFORMITY ASSESSMENT" of the Regulation on Ecodesign of Energy Related Products (CBK No: 5187). Provided that it is duly justified and proportional to the risk, conformity assessment procedures are selected among the relevant modules specified in the "CE" Marking Regulation.

Date of Entry Into Force:

14.01.2015

 

Communique on energy labelling of refrigerating appliances (2019/2016/AB) (SGM:2021/8)

Scope of the Legislation:

Covers refrigeration devices with direct selling function.

Basic Security Requirements:

In addition to the basic safety requirements defined in the Electromagnetic Compatibility Regulation (2014/30/EU), the Regulation on Electrical Equipment Designed for Specific Voltage Limits (2014/35/EU), direct sales, including appliances sold for the cooling of products other than food products It is to determine the requirements for labeling and additional product information of cooling devices operating depending on the multifunctional electrical source.

Conformity Mark Required by the Legislation:

CE mark and Energy Label

Conformity Assessment Procedure Required by the Legislation:

Measurements and calculations are made using harmonized standards, other generally recognized reliable, accurate and repeatable methods that take into account the latest technology, in order to comply with the requirements of this Communiqué and to verify compliance with the requirements of this Communiqué.

Conformity assessment procedures are determined by application communiqués and the manufacturer is given the right to choose between those specified in the "ANNEX-4 INTERIOR DESIGN CONTROL" and "MANAGEMENT SYSTEM REGARDING APPENDIX-5 CONFORMITY ASSESSMENT" of the Regulation on Ecodesign of Energy Related Products (CBK No: 5187). Provided that it is duly justified and proportional to the risk, conformity assessment procedures are selected among the relevant modules specified in the "CE" Marking Regulation.

Date of Entry Into Force:

25.03.2021

 

Communique on energy labelling of household tumble driers  (SGM:2013/6)

Scope of the Legislation:

It includes domestic tumble dryers operating with mains energy and gas, and built-in household tumble dryers, including those sold for non-domestic use.

Basic Security Requirements:

In addition to the basic safety requirements defined in the Electromagnetic Compatibility Regulation (2014/30/EU), the Regulation on Electrical Equipment Designed for Certain Voltage Limits (2014/35/EU), labeling and additional product information regarding the placing on the market of household tumble dryers determine the procurement requirements.

Conformity Mark Required by the Legislation:

CE mark and Energy Label

Conformity Assessment Procedure Required by the Legislation:

Measurements and calculations are made using harmonized standards, other generally recognized reliable, accurate and repeatable methods that take into account the latest technology, in order to comply with the requirements of this Communiqué and to verify compliance with the requirements of this Communiqué.

Conformity assessment procedures are determined by application communiqués and the manufacturer is given the right to choose between those specified in the "ANNEX-4 INTERIOR DESIGN CONTROL" and "MANAGEMENT SYSTEM REGARDING APPENDIX-5 CONFORMITY ASSESSMENT" of the Regulation on Ecodesign of Energy Related Products (CBK No: 5187). Provided that it is duly justified and proportional to the risk, conformity assessment procedures are selected among the relevant modules specified in the "CE" Marking Regulation.

Date of Entry Into Force:

15.05.2013

 

Communique on Energy Labelling of Light Sources (2019/2016/AB) (SGM:2021/8)

Scope of the Legislation:

It covers light sources and light sources included in the containing product.

Basic Security Requirements:

In addition to the basic safety requirements defined in the Electromagnetic Compatibility Regulation (2014/30/EU), the Regulation on Electrical Equipment Designed for Certain Voltage Limits (2014/35/EU), light sources with or without separate control equipment or in the product containing to determine the requirements for the labeling of light sources and their additional product information.

Conformity Mark Required by the Legislation:

CE mark and Energy Label

Conformity Assessment Procedure Required by the Legislation:

The energy efficiency class of light sources is the sum calculated by dividing the declared useful luminous flux in ɸuse (expressed in lm) by the declared operational power consumption Pon (expressed in W) and multiplying by the valid coefficient FTM in Table 2. The electricity supply efficiency is determined over ηTM as stated in Table 1 in the Communiqué.

Conformity assessment procedures are determined by application communiqués and the manufacturer is given the right to choose between those specified in the "ANNEX-4 INTERIOR DESIGN CONTROL" and "MANAGEMENT SYSTEM REGARDING APPENDIX-5 CONFORMITY ASSESSMENT" of the Regulation on Ecodesign of Energy Related Products (CBK No: 5187). Provided that it is duly justified and proportional to the risk, conformity assessment procedures are selected among the relevant modules specified in the "CE" Marking Regulation.

Date of Entry Into Force:

25.03.2021

 

Communique on Energy Labelling of Air Conditioners (SGM/2013-11) (SGM:2013/11)

Scope of the Legislation:

It covers air conditioners with a rated capacity of less than or equal to 12 kW, designed to cool or heat if the product does not have a cooling function, operating with mains energy.

Basic Security Requirements:

In addition to the basic safety requirements defined in the Electromagnetic Compatibility Regulation (2014/30/EU), the Regulation on Electrical Equipment Designed for Certain Voltage Limits (2014/35/EU), it is to determine the requirements for labeling and providing additional product information regarding the placing of air conditioners on the market. .

Conformity Mark Required by the Legislation:

CE mark and Energy Label

Conformity Assessment Procedure Required by the Legislation:

Measurements and calculations are made using harmonized standards, other generally recognized reliable, accurate and repeatable methods that take into account the latest technology, in order to comply with the requirements of this Communiqué and to verify compliance with the requirements of this Communiqué.

Conformity assessment procedures are determined by application communiqués and the manufacturer is given the right to choose between those specified in the "ANNEX-4 INTERIOR DESIGN CONTROL" and "MANAGEMENT SYSTEM REGARDING APPENDIX-5 CONFORMITY ASSESSMENT" of the Regulation on Ecodesign of Energy Related Products (CBK No: 5187). Provided that it is duly justified and proportional to the risk, conformity assessment procedures are selected among the relevant modules specified in the "CE" Marking Regulation.

Date of Entry Into Force:

24.12.2013

 

General Information regarding Legislation EU 811/2013 (SGM-2018/1) with regard to the energy labelling of space heaters, combination heaters, packages of space heater, temperature control and solar device and packages of combination heater, temperature control and solar device

Scope of the Legislation:  This Legislation establishes requirements for the energy labelling of, and the provision of supplementary product information on, space heaters and combination heaters with a rated heat output ≤ 70 kW, packages of space heater ≤ 70 kW, temperature control and solar device and packages of combination heater ≤ 70 kW, temperature control and solar device.

Basic Security Requirements:

---

Conformity Mark Required by the Legislation:

Conformity Assessment Procedure Required by the Legislation:

Annex VIII

Date of Entry Into Force: 21/4/2018

 

General Information regarding Legislation EU 812/2013 (SGM-2018/2) with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device

Scope of the Legislation:  This Legislation establishes requirements for the energy labelling of, and the provision of supplementary product information on, water heaters with a rated heat output ≤ 70 kW, hot water storage tanks with a storage volume ≤ 500 litres and packages of water heater ≤ 70 kW and solar device.

Basic Security Requirements:

---

Conformity Mark Required by the Legislation:

 

Conformity Assessment Procedure Required by the Legislation:

Annex IX

Date of Entry Into Force: 21/4/2018

 

Commission Delegated Regulation (EU) 2015/1094 (SGM:2020/4) of 5 May 2015 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of professional refrigerated storage cabinets

Scope of the Legislation:  

This Regulation establishes requirements for the labelling of, and the provision of supplementary product information on, professional refrigerated storage cabinets

Basic Security Requirements:

---

Conformity Mark Required by the Legislation:

Conformity Assessment Procedure Required by the Legislation:

 (EU) 2015/1094, Annex X

Date of Entry Into Force: 5/9/2021

 

Commission Delegated Regulation (EU) No 1254/2014 (SGM:2021/19) of 11 July 2014 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of residential ventilation units

Scope of the Legislation: 

This Regulation establishes energy labelling requirements for residential ventilation units.

Basic Security Requirements:

---

Conformity Mark Required by the Legislation:

Conformity Assessment Procedure Required by the Legislation:

Annex IX

Date of Entry Into Force: 25/5/2021

 

Commission Delegated Regulation (EU) 2015/1186 (SGM: 2022/30) of 24 April 2015 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of local space heaters

Scope of the Legislation: 

This Regulation establishes requirements for the energy labelling of, and the provision of supplementary product information on local space heaters with a nominal heat output of 50 kW or less.

Basic Security Requirements:

---

Conformity Mark Required by the Legislation:

Conformity Assessment Procedure Required by the Legislation:

Annex IX

Date of Entry Into Force: 26/6/2022